Diesel generator sets
C280-8
Producing reliable power from 2200 to 2420 ekW at 60 Hz and 2938 to 3250 kVA at 50 Hz, our C280-8 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set can be configured to meet IMO/EPA Tier 2 or EPA Tier 4 Final.
- Maximum Rating2420 ekW (60Hz), 3250 kVA (50Hz)
- Minimum Rating2200 ekW (60Hz), 2938 kVA (50Hz)
- Emissions/Fuel StrategyEPA Tier 4 Final, IMO Tier 2
- Frequency50 / 60 Hz
- Duty CyclePrime, Continuous
| Maximum Rating | 2420 ekW (60Hz), 3250 kVA (50Hz) |
|---|---|
| Minimum Rating | 2200 ekW (60Hz), 2938 kVA (50Hz) |
| Emissions/Fuel Strategy | EPA Tier 4 Final, IMO Tier 2 |
| Frequency | 50 / 60 Hz |
| Speed | 900 / 1000 rpm |
| Duty Cycle | Prime, Continuous |
| Engine Model | C280-8, I-8,4-Stroke Water-Cooled Diesel |
|---|---|
| Bore | 11 in |
| Stroke | 11.8 in |
| Displacement | 9064 in³ |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
| Length - Maximum | 404 in |
|---|---|
| Width - Maximum | 99.62 in |
| Height - Maximum | 156.6 in |
| Dry Weight - Genset (maximum) | 91050 lb |
Air Inlet System <!-- 3600 series only -->
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Air inlet shutoff
Cooling System
- Engine coolant water drains
- Jacket water thermostats
- Water temperature regulator
Exhaust System
- Includes adapter, flexible exhaust fitting
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Oil filler and dipstick
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
Mounting System
- Engine and generator mounting
- Damper, torsional vibration
Starting / Charging System
- Air silencer
- Vane type air starter
- One motor, engine mounted at rear, on left side
- Line group for single point custom connection
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
-
Download ↓Product Rating guide
-
Download ↓C280-8 Spec Sheet: 60 Hz 2420 ekW, 50Hz 3250 kVA
Need installed dimensions with enclosure and tank? See Model Configurations