Auxiliary engines
3516E
The 3516E marine auxiliary engine is now available in a wide range of ratings that meet U.S. EPA Tier 4 Final and IMO III marine emissions regulations. As the commercial marine industry adjusts their operations to meet EPA Tier 4 Final and IMO III emissions standards, Caterpillar Marine has introduced a solution built to maximize performance while meeting regulations. Caterpillar's combination of a fuel-efficiency-optimized engine and a selective catalytic reduction (SCR) aftertreatment system is a solution that not only reduces NOx emissions, but can also lower a customer's owning and operating costs in the process.
Request a Quote
Have questions? Call 800.768.4200
| Power Range | 1921 - 2368 bkW |
|---|
| Frequency | 50 / 60 |
|---|
| Emissions | U.S. EPA Tier 4, IMO II/III |
|---|---|
| Aspiration | Turbocharged - Aspirator |
| Bore | 6.69 in |
| Stroke | 8.46 in |
| Displacement | 4765.0 in³ |
| Configuration | V 16, 4-Stroke-Cycle Diesel |
| Rotation from Flywheel End | Counterclockwise |
| Minimum Width | 72.8 in |
|---|---|
| Dry Weight | 22060.0 lb |
| Height | 90.9 in |
| Maximum Width | 87.9 in |
| Length | 146.6 in |
Air Inlet System
- Corrosion-resistant aftercooler core
Control System
- Dual A5 engine control modules with electronic unit injection and low pressure fuel system
Cooling System
- Auxiliary fresh water pump
- Gear Driven, centrifugal jacket water pump with 40% more capacity
Exhaust System
- Dual turbochargers with water-cooled bearings and heat shields
Fuel System
- Duplex Fuel and Oil Filtration
General
- Vibration damper and guard
- Meets SOLAS regulations
- Download ↓3516E Marine Auxiliary Engine Spec Sheet
Need installed dimensions with enclosure and tank? See Model Configurations