Electric power controls

Cat® CG Series

The CG Series – Contactor-type, Open Transition (CG) and Delayed Transition (CGD) ATS for general purpose applications offers functionality for critical emergency power applications in commercial and light industrial applications, with an enhanced feature set and LCD HMI interface.

The CG provides a durable mechanism that is tested up to 6,000 cycles. Electrical system parameters are set via the HMI and pre-configuration file upload is available via USB or Bluetooth connection.

Request a Quote
Have questions? Call 800.768.4200
Technical Summary
Rating Range30 - 3000 A
Transfer TypeOpen Transition (CG), Delayed Transition (CGD)
Switch TypeContactor
System Information
Product nodes30, 60, 100, 125, 160, 200, 260, 400, 600, 800, 1000, 1200, 1600, 2000, 2600, 3000A
Rated Voltage and Frequency200-480VAC, 50/60 Hz
Phase systemSingle and Three (three phase only >600A)
Number of poles2, 3 and 4 (3 & 4 pole only >600A)
Neutral configurationOptional Solid or Switched neutral
Product typeOpen transition (I-II), Delayed Transition (I-O-II)

Control

  • LCD + keys
  • Voltage and frequency settings: Pick up and Drop out
  • Time Delay Settings: Override momentary, Transfer, Generator stop, Center-OFF, Pre-transfer, Post-transfer, Elevator Pre-signal, Elevator Post-signal, and Load shead
  • Source failure detections: No Voltage, Under/Over Voltage, Phase missing, Voltage unbalance, Invalid frequency, and Incorrect phase sequence

Additional Features

  • LED indications for ATS, S1 and S2 status
  • Open transition - Standard digital inputs/outputs (1/1)
  • Delayed transition - Standard digital inputs/outputs (2/1)
  • Programmable digital inputs/outputs
  • Auto config (voltage, frequency, phase system)
  • Source priority (Source 1/2, No priority)
  • Manual re-transfer
  • In-phase monitor (synchro check)
  • Genset exercising: on-load, off-load
  • Load shedding
  • Real time clock
  • Event log

Need installed dimensions with enclosure and tank? See Model Configurations