Diesel generator sets
C32B (60 Hz)
The Cat® C32B diesel generator sets have been developed for standby, prime, mission-critical, and continuous power applications, delivering reliable power from 830 to 1250 ekW at 60 Hz, meeting ISO 8528-5 transient response requirements, and are capable of accepting 100% block load while complying with regional emission standards.
Request a Quote
Have questions? Call 800.768.4200
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements with G3 load acceptance capability.
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
SR5 Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 50°C (122°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
- UL 2200 Listed
- CSA
- IBC seismic certification
- OSHPD pre-approval
One Safe Source
- Components used in the generator set are selected at the design stage to provide optimum package performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Saves up to 8% installed space
Requires less space for installation
Weighs 28% less
Reduced amount of structural support required
Full Power up to 50°C Ambient
Provides full power even on hottest days of the year
G3 Class Load Acceptance
Faster recovery and stable power during sudden load changes
| Standby Rating | 1000/1100/1250 ekW |
|---|---|
| Prime Power Rating | 910 ekW |
| Emissions/Fuel Strategy | U.S. EPA Tier 2 Certified / Low BSFC |
| Voltage | 220 to 4160 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Mission Critical, Prime, Continuous |
| Engine Model | C32B TA, V-12, 4-Stroke Water-Cooled Diesel |
|---|---|
| Bore | 5.71 in |
| Stroke | 6.38 in |
| Displacement | 1958.86 in³ |
| Compression Ratio | 15.0:1 |
| Aspiration | TA |
| Fuel System | MEUI |
| Governor Type | Adem™A4 |
| Length - Minimum | 164 in |
|---|---|
| Length - Maximum | 172.7 in |
| Width - Minimum | 66.3 in |
| Width - Maximum | 87.7 in |
| Height - Minimum | 85.1 in |
| Height - Maximum | 86.4 in |
| Dry Weight - Genset (minimum) | 14700 lb |
| Dry Weight - Genset (maximum) | 16755 lb |
Air Inlet System
- Single element canister type with service indicator
Control Panel
- GCCP 1.2
- GCCP 1.3
Cooling System
- Caterpillar extended life coolant
- Air-to-air aftercooled
- Coolant drain line with valve
- Low coolant level sensor
- Fan and belt guards
- Radiator fan and fan drive
Exhaust System
- 203 mm (8 in) ID round flanged outlet
- Exhaust manifold
Fuel System
- Fuel cooler
- Fuel priming pump
- Secondary fuel filters
- Primary fuel filter with water separator
General
- Caterpillar yellow with high gloss black rails & radiator
Generators and Attachments
- Class H at 40 deg cel ambient
- 3 Phase brushless
- Permanent magnet excitation (PMG)
- Winding temperature detectors
- Integrated voltage regulator (IVR)
- NEMA Class H insulation
- Busbar connections, top center mounted, top cable entry
- Internal excitation (IE)
Governing System
- ADEM™ A4
Lube System
- Gear type lube oil pump
- Oil drain lines and valve
- Lubricating oil
- Integral lube Oil cooler
- Oil filter, filler and dipstick
Mounting System
- Rubber anti-vibration mounts
- Rails - Engine/generator/radiator mounting
Power Termination
- Busbar
Starting and Charging
- Charging alternator
- 24 Volt electric starting motor
- Battery disconnect switch
- Battery, rack and cables
Telematics
- Cat® Product Link™ cellular
- Electric Power Ratings Guide
- C32B, 60 Hz, 1000 ekW Standby/MC, 910 ekW Prime, 830 ekW Cont., Low Fuel Consumption Spec Sheet
- C32B, 60 Hz, 1000 ekW Standby/MC, 910 ekW Prime, 830 ekW Cont., U.S. EPA Certified for Emergency Stationary Applications (Tier 2) Spec Sheet
- C32B, 60 Hz, 1250 ekW Standby/MC, 1135 ekW Prime, Low Fuel Consumption Spec Sheet
- C32B, 60 Hz, 1250 ekW Standby/MC, 1135 ekW Prime, U.S. EPA Certified for Emergency Stationary Applications (Tier 2) Spec Sheet
Need installed dimensions with enclosure and tank? See Model Configurations
