Diesel generator sets
C280-6
Producing reliable power from 1650 to 1820 ekW at 60 Hz and 2200 to 2425 kVA at 50 Hz, our C280-6 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set meets IMO/EPA Tier 2 emissions.
Request a Quote
Have questions? Call 800.768.4200
Cat Diesel Engine
SR5 Alternator
Full Range of Attachments
Over 200,000,000 Operating hours
at Global locations
Up to 10% Better Fuel Economy
Demonstrated savings
Over 20% Reduction in Service Time
Two inspection ports per cylinder, segmented camshafts and individual heads ease service
| Maximum Rating | 1820 ekW (60Hz), 2425 kVA (50Hz) |
|---|---|
| Minimum Rating | 1650 ekW (60Hz), 2200 kVA (50Hz) |
| Emissions/Fuel Strategy | IMO Tier 2 |
| Frequency | 50 / 60 Hz |
| Speed | 900 / 1000 rpm |
| Duty Cycle | Prime, Continuous |
| Engine Model | C280-6, I-6,4-Stroke Water-Cooled Diesel |
|---|---|
| Bore | 11 in |
| Stroke | 11.8 in |
| Displacement | 111 in³ |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
| Length - Maximum | 404 in |
|---|---|
| Width - Maximum | 99.62 in |
| Height - Maximum | 156.6 in |
| Dry Weight - Genset (maximum) | 74970 lb |
Air Inlet System
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Breather, crankcase, top-mounted
Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
Exhaust System
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Service side engine mounted on cylinder block inspection covers
- Crankcase explosion relief valves
- Oil filler and dipstick
- Oil pressure regulating valve
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- Vane type air starter
- Line group for single point custom connection
- Air silencer
- One motor, engine mounted at rear, on left side
General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Need installed dimensions with enclosure and tank? See Model Configurations
