Marine generator sets

C18

The C18 is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.

Request a Quote
Have questions? Call 800.768.4200
Power Rating
Power Range260 - 565 ekW
Generator Set Specifications
Frequency50 / 60
Minimum Rating260 ekW (325 kVA)
Maximum Rating565 ekW (706 kVA)
Engine Specifications
ConfigurationIn-line 6, 4-Stroke-Cycle Diesel
AspirationTurbocharged - Aftercooled
Bore5.7 in
Stroke7.2 in
Fuel SystemMEUI
Oil Change Interval250 / 500 hours
GovernorElectronic
Refill Capacity68
CoolingHeat Exchanger, Keel, Radiator Cooled
Rotation from Flywheel EndSAE No. (136 teeth)
Generator Set Configurations
EmissionsEPA Tier 3, IMO II, EU IWW, EU Stage V, China II
Generator Set Dimensions - Radiator Cooled
Height94.8 in
Length55.6 in
Width66.9 in
Weight - Approximate13396 lb
Generator Set Dimensions - Keel and Hex Cooled
Length119.6 in
Height64.9 in
Width55.6 in
Weight - Approximate9747 lb
Generator Specifications
ExcitationSRMP
InsulationClass H
IP RatingIP23 (standard), IP 44 (optional)
Voltage RegulatorCDVR (Digital Voltage)

Air inlet system

  • Separate circuit after-cooled (SCAC)
  • Open Crankcase Ventilation (OCV) system
  • Turbocharger, jacket water cooled
  • Turbocharger inlet, 152 mm (6 in) OD straight connection

Cooling system

  • SCAC pump, gear driven, for HEX cooled engines only
  • Jacket water pump, gear driven
  • SCAC and JW shunt tanks for maintaining proper pump inlet pressures

Exhaust system

  • Water-cooled exhaust manifold & turbocharger
  • Round flanged exhaust outlet

Fuel system

  • Hybrid fuel line design
  • Fuel transfer pump, gear driven
  • Front service simplex fuel system
  • Manual fuel priming pump

Lube system

  • Center sump oil pan: Deep 500 hour oil change interval
  • Front and top service oil filler locations
  • Front service dipstick

Lube System

  • Oil pump, gear driven

Mounting system

  • Vibration Isolators
  • Formed C-channel rails

Control system

  • Common Interface to all Genset Control Panels
  • Programmable Low Idle
  • Electronic Diagnostics and Fault Logging
  • Electronic Fuel/Air Ratio Control

Control System

  • Programmable ECM Shutdowns for: High Jacket Water Coolant Temp Low Engine Oil Pressure Engine Overspeed
  • C18 Marine Generator Set Spec Sheet (260 ekW - 565 ekW)
    application/pdf
    Download ↓

Need installed dimensions with enclosure and tank? See Model Configurations