Industrial engines

C4.4

The Cat® C4.4 Industrial Diesel Engine is offered in ratings ranging from 74-129.4 bkW (99-173.5 bhp) @ 2200 rpm, which meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. U.S. EPA Tier 4 Interim equivalent and EU Stage IIIB equivalent ratings are also available using U.S. EPA and EU Flex provisions.

Request a Quote
Have questions? Call 800.768.4200
Power Rating
Maximum Power173.5 hp
Maximum Torque553 lb-ft @ 1400 rpm
Rated Speed2200 rpm
Minimum Power93.9 hp
Emission Standards
EmissionsU.S. EPA & CARB Tier 4 Final
General
Engine ConfigurationInline 4
Bore4.1 in
Stroke5 in
Displacement268.5 in³
Compression Ratio16.5:1
AspirationTurbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion SystemDirect Injection
Rotation from Flywheel EndCounterclockwise
AftertreatmentDOC+SCR or DOC+DPF+SCR
Engine Dimensions - Approximate
Length33.3 in
Width29.1 in
Height34.1 in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments926 lb
Aftertreatment Dimensions
Length26.5 in
Width18.8 in
Height15.3 in
Weight99 lb
Aftertreatment Dimensions*
Diameter10.6 in

Air Inlet System

  • Standard air cleaners

Control System

  • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
  • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines

Cooling System

  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix

Flywheels and Flywheel Housing

  • Wide choice of drivetrain interfaces, including SAE No. 2 and SAE No. 3 configurations

Fuel System

  • Electronic high pressure common rail
  • Innovative filter design to ensure maximum protection of the engine

Lube System

  • Wide choice of sumps for different applications

Power Take Off

  • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.

General

  • Available with or without a balancer
  • Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Interim Equivalent, EU Stage IIIB Equivalent Aftertreatment / Clean Emissions Control Equipment

  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • No ash service requirement
  • Passive regeneration

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment

  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • Selective Catalytic Reduction (SCR)
  • 3" flex pipe connection with straight, 45°, and 90° options for flexibility

Need installed dimensions with enclosure and tank? See Model Configurations