Industrial engines

3054C

The Cat® 3054C Industrial Diesel Engine is offered in ratings ranging from 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm. These ratings meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for other regulated and non-regulated areas. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Request a Quote
Have questions? Call 800.768.4200
Power Rating
Maximum Power130 hp
Maximum Torque369 lb-ft @ 1400 rpm
Rated Speed2200-2400 rpm
Minimum Power69.7 hp
Emission Standards
EmissionsU.S. EPA Tier 2 Equivalent, EU Stage II Equivalent
General
Engine ConfigurationInline 4, 4-Stroke-Cycle Diesel
Bore4.1 in
Stroke5 in
Displacement269 in³
Compression Ratio16.2:1
AspirationNaturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion SystemDirect Injection
Rotation from Flywheel EndCounterclockwise
Aftertreatment-
Engine Dimensions - Approximate
Length26.1 in
Width24.4 in
Height31.9 in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments674.6 lb

Air Inlet System

  • Inlet manifold with choice of inlets.

Control System

  • Alternator
  • Starter motor
  • Control Panel
  • Glow plug starting aid

Cooling System

  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix

Flywheels and Flywheel Housing

  • SAE No. 3 flywheel housing
  • Flywheel and starter rings

Fuel System

  • Fuel filter positions

Lube System

  • Lubricating oil filters and breathers
  • Oil filter positions
  • Lube oil sump

Power Take Off

  • SAE B Power Take Off (PTO)

General

  • Timing case and gear-driven auxiliaries
  • Belt-driven auxiliaries
  • Engine mountings
  • Gauges
  • Displays
  • Power and torque curve tailoring
  • Paint: Caterpillar yellow, with optional colors available at request

Need installed dimensions with enclosure and tank? See Model Configurations