Mobile generator sets
XQP500
This XQP500 generator set is fuel consumption optimized. A unique feature is the introduction of clutch fan drive technology, where the fan no longer needs to runs continuously at full speed and power. This saves additional fuel, while also lowering noise output; an ideal feature when operating at lower loads, in cooler temperatures, or most importantly, in evenings when noise levels are most noticeable.
Request a Quote
Have questions? Call 800.768.4200
Rental ready
- Robust, durable product with a range of rental ready features to meet job requirements and applications.
Fuel/Emissions Strategy
- Emissions Equivalent to R96 EU Stage IIIA or Best Fuel Efficiency.
Cat C15 Diesel Engine
- Industry proven reliability.
Cat EMCP 4.2B Control Panel
- Easy to use digital controls.
Cat LC6100 Generator
- Integrated voltage regular for fast response in demanding applications.
Robust Galvanised Enclosure
- Inhibits corrosion in service. Prevents water ingress, provides security and sound attenuation.
Sound Isolated Operator Panel
- Improved operator comfort.
Cat Connect
- Remote monitoring for fleet management and asset tracking.
Factory Designed, Built and Tested
- Single-source Supplier
500 hr Oil Change Intervals
- Reducing operating costs and producing less waste.
Improved Transportability
- Drag bars, Lifting frame, Fork lift pockets and 4 point lift.
Additional Options Available
- Synchronising controls. Extended Service interval kits.
Selectable 50/60Hz Operation
Easy frequency switch via terminal link eliminate geographical limitations allowing generator set to be used wherever it is needed
Flexible 3-way fuel valve
Extended run time provided by changeover from base tank to external bulk tank
Standard 500 Hour oil change intervals
Maximizes run time before routine service is required
| Rating Prime | 500 kVA |
|---|---|
| Frequency | 50/60 Hz |
| Voltage | 127 - 480 V |
| Engine | Cat C15 |
|---|---|
| Fuel | Diesel |
| Width | 77 in |
|---|---|
| Height | 90 in |
| Length | 200.9 in |
| Weight - With Lube Oil and Coolant | 13176 lb |
| 100% Load 50Hz | 29.1 gal/hr |
|---|---|
| 100% Load 60Hz | 32 gal/hr |
| 75% Load 50Hz | 23 gal/hr |
| 75% Load 60Hz | 26.3 gal/hr |
| 50% Load 50Hz | 16.4 gal/hr |
| 50% Load 60Hz | 18.3 gal/hr |
| 100% Load 50Hz | 29 gal/hr |
|---|---|
| 100% Load 60Hz | 28.3 gal/hr |
| 75% Load 50Hz | 20.1 gal/hr |
| 75% Load 60Hz | 22 gal/hr |
| 50% Load 50Hz | 14.3 gal/hr |
| 50% Load 60Hz | 15.7 gal/hr |
| Sound Power @ 1 meters (3 feet) @ 75% of rating (50Hz) | 77.5 dB(A) |
|---|---|
| Sound Power @ 1 meters (3 feet) @ 75% of rating (60Hz) | 79.8 dB(A) |
| Sound Power @ 1 meters (3 feet) @ 75% of rating (50Hz) | 80.1 dB(A) |
|---|---|
| Sound Power @ 1 meters (3 feet) @ 75% of rating (60Hz) | 80 dB(A) |
CAT C15 Diesel Engine
- Turbocharged
Generator
- LC6114F Frame
Air Filter
- Cyclonic/paper with dust cup and service indicator
Cat Connect remote monitoring
- Provides package monitoring and management
Cooling System
- Package mounted radiator with vertical air discharge. Filled from factory
Charging / Starting System
- 24V heavy duty starting motor and charging alternator c/w battery isolator
Fuel System
- Dual wall fuel tank with 3 way directional valve for external supply
Control Panel
- Digital EMCP4.2B set mounted controller
Distribution
- Single, robust enclosure for controls and distribution c/w 4 pole circuit breaker and safety cut off
Structure
- Heavy Duty steel base frame with integral fuel tank. Fork lift pockets. Dragging bars. Lifting frame and 4 point lift. base frame is wider than enclosure to protect generator set during transportation.
Enclosure
- Sound attenuating, galvanised steel enclosure with exceptional noise reduction performance
Exhaust
- Integrated spark arresting silencer
Lube Oil
- On engine primary and secondary oil filters. Filled from factory
General
- Factory tested and inspected
Need installed dimensions with enclosure and tank? See Model Configurations
