Gas generator sets
CG170-16
From natural gas-fueled combined heat and power (CHP) systems and emergency power for facilities, to renewable biogas energy to support the local grid, or electricity generated from coal mine gases, Caterpillar has a wide range of reliable gas power solutions.
Request a Quote
Have questions? Call 800.768.4200
High Efficiency, Lower Operating Costs
- Miller cycle timing with combustion chamber and spark plug improvement help on saving up to 15% fuel gas per year
- CG170 (non-miller) is optimized for Island-Mode capability
- Gearbox helps limit wear and tear on engine components, lowering operating costs and increasing availability
Low installation, Building and Operating Costs
- Extended maintenance intervals thanks to sooth-free combustion and enlarged oil tank
- Low fuel consumption due to improved combustion chamber and pre-chamber spark-plugs
- Flexible fields of application also with fluctuating gas qualities due to Total Electronic Management (TEM)
- Optimized oil management
Optimized Lubrication Consumption
- Consumes up to 1900 liter less lube oil per year than comparable models<li>
- Longer lubricant change and oil change intervals<li>
Up to 47% Greater oil change interval
Lower lube oil consumption leading to greater time interval between lube oil changes
Up to 14% savings on service
Extended maintenance intervals leading to lower service costs
Up to 1900 L/Year Lower lube oil consumption
leading to lower service costs and extended maintenance intervals
| Continuous Rating | 1560 ekW @1.0pf |
|---|---|
| Fuel Type | Natural Gas, Biogas, Coal Gas |
| Maximum Electrical Efficiency | 43.30% |
| Frequency | 50 or 60 Hz |
| RPM | 1500 or 1800 rpm |
| Engine Model | CG170-16 |
|---|---|
| Displacement | 4320 in³ |
| Aspiration | TA |
| Bore | 6.7 in |
| Stroke | 7.7 in |
| Length | 261.4 in |
|---|---|
| Width | 70 in |
| Height | 87 in |
| Dry Weight - Genset | 32848.5 lb |
Air Inlet
- Turbocharger with a water-cooled bearing case for all cylinder
- One-element single-stage air cleaner with enclosure and sevice indicator
Control Panels
- TEM (Total Electronic Management)
Cooling
- Jacket water and SCAC thermostats
- Electrical jacket water and aftercooler coolant pump
- flange connections for JW inlet and outlet
- Cat flanges on SCAC circuit
Exhaust
- PEARL/Low resistence exhaust system
- Closed crankcase ventilation system
Fuel system
- Independently controlled cylinder monitoring and ignition system
- Pre-chamber spark plugs
- Electronic fuel metering valve
Generator
- Busbar connections
- Anti-condensation space heater
- closed-coupled generator result in no torque transmission to the base frame
- Winding temperature detectors
- Reactive droop
- 3-phase sensing and KVAR/PF control
- grid code generator
Starting/Charging
- 24V starting motors
- Battery disconnect switch
General
- Crankshaft vibration damper and guard
Need installed dimensions with enclosure and tank? See Model Configurations
